www.RX7fb.com

Not posed or lit very well Nik ... sorry mate Letting the side down I know





It's a silicone cap type thingy and pretty much the right color too although you'd never tell from the image quality. I'll measure the OD of the larger fitting and see what I can find of a similar ilk. (now, there's a good word .. ILK .. that's in the Codge vocabularium isn't it) ?

Tape with a "nonprofessional look". Take a worm drive hose clip. If the heat is coming the glue of the tape will be going.

Yes.. most unprofessional and I am pleased to say, not my work either!! Will attend to it today. Thanks for your comments and no, you have not hurt my feelings in any way

Are you still after a mirror mate? I found 2 in my box of bits at the workshop

Marc S wrote:Are you still after a mirror mate? I found 2 in my box of bits at the workshop

Actually, I am Marc ... must do that catching up thing

spirit r wrote:

IMAG0798_zpsa401b51e.jpg

Tape with a "nonprofessional look". Take a worm drive hose clip. If the heat is coming the glue of the tape will be going.

images.jpg

Nonprofessional looking tape now removed. Strangely, it appeared to serve no purpose whatsoever

Mmm, nice bung I fixed mine with a little breather filter but that's a neater solution, innit

[quote Vielen Dank für Ihre Kommentare und nein, haben Sie nicht meine Gefühle verletzt in keiner Weise : Lol: Nonprofessional looking tape now removed. Strangely, it appeared to serve no purpose whatsoever [/quote]
I knew you are a hardcore guy but attention if you loose the part from the aircleaner you will get more power on the engine! Get you?
Thomas

Can´t believe, picture please!

Thomas, Ich glaube, er will den Standard-Look zu halten.

Und nicht so viel Pferdestärke vielleicht?