thats what the lights are for hahah
the only real one to watch is the wideband...
84GSLSE 13BREW Swap build
-
DWNUNDR
- VIP User
- Posts: 256
- Joined: Sat Jan 20, 2018 4:02 pm
- Has thanked: 39 times
- Been thanked: 49 times
Re: 84GSLSE 13BREW Swap build
gotten to do a few car shows recently.. the best one yet was finally having my 3 mates all have our cars running on the same day together.. haha
- 70975868_10156783242242921_1971983239811694592_o.jpg (155.72 KiB) Viewed 6443 times
-
DWNUNDR
- VIP User
- Posts: 256
- Joined: Sat Jan 20, 2018 4:02 pm
- Has thanked: 39 times
- Been thanked: 49 times
Re: 84GSLSE 13BREW Swap build
next up as we head into winter months... Ford 31spline 8.8 rear end... in the process of stripping it down, chipping off the rust flaking, cleaning it up, then I will shorten it to fit... trying to decide the route for brakes etc... part of me as a machinist wants to make all my own stuff... I need all the brackets for suspension remade and welded, custom caliper brackets made to run stock brakes... grannys speed shop over here does these rears, they also sell all the stuff I need... would cost me around $600 to have all the parts for me to just weld it on... but I am replacing the ebay intercooler that came with the motor for a Treadstone one, and refitting my radiator back to normal upright, and upgrading the fans.. so the less money I throw out the better...
- 71892913_10156807096482921_5358349598752505856_n.jpg (204.59 KiB) Viewed 6410 times
- 71142181_10156807096547921_6205844592982491136_n.jpg (106.55 KiB) Viewed 6410 times
- 71312284_10156807096617921_5550140826484473856_n.jpg (212.64 KiB) Viewed 6410 times
-
Hobbawobba
- VIP User
- Posts: 1938
- Joined: Tue Nov 01, 2011 9:44 pm
- Location: Worcester - UK
- Has thanked: 628 times
- Been thanked: 218 times
-
DWNUNDR
- VIP User
- Posts: 256
- Joined: Sat Jan 20, 2018 4:02 pm
- Has thanked: 39 times
- Been thanked: 49 times
Re: 84GSLSE 13BREW Swap build
smaller and lighter than a 9inch, apparently more efficient and possibly stronger or as strong... we will see
-
spirit r
- VIP User
- Posts: 1895
- Joined: Sat Feb 09, 2013 4:15 pm
- Location: Germany Black Forest
- Has thanked: 473 times
- Been thanked: 253 times
- Contact:
-
DWNUNDR
- VIP User
- Posts: 256
- Joined: Sat Jan 20, 2018 4:02 pm
- Has thanked: 39 times
- Been thanked: 49 times
Re: 84GSLSE 13BREW Swap build
actually I will flowjet them out... pretty much the same thing.. same way I made my drop mounts
- Attachments
-
- 16998831_10154461776632921_1993609892543707569_n.jpg (69.54 KiB) Viewed 7200 times