Cheers mate!
Hopefully so, to me it feels like I'm going quite slow as I'm working on it by myself. But I'm putting everything into small chunks so I can manage it all without overwhelming myself.
Putting on average about 6 hours into it each night and on weekends more. So doing the maths I will hopefully be on the road and able to come to some car shows with you guys next summer (fingers are crossed).
The main issue I'm going to come across is finding a good supplier of fastners as everything is in metric fine!
Jake
1975 RX-4 SEDAN - BUILD THREAD - SCABSY
Re: 1975 RX-4 SEDAN - BUILD THREAD - SCABSY
Painted the footwork tonight and a couple other odds and sods.
Tomorrow's going to be the big night of welding all the pin holes etc on the chassis. Hopefully my friend and I will smash it all out. I've pre marked everything up when I went over the shell with a fine tooth combe.
Tomorrow's going to be the big night of welding all the pin holes etc on the chassis. Hopefully my friend and I will smash it all out. I've pre marked everything up when I went over the shell with a fine tooth combe.
- Attachments
-
- IMG_20180517_165053.jpg (182.93 KiB) Viewed 5241 times
-
- IMG_20180517_180333.jpg (209.89 KiB) Viewed 5241 times
-
- IMG_20180517_180349.jpg (93.83 KiB) Viewed 5241 times
Re: 1975 RX-4 SEDAN - BUILD THREAD - SCABSY
You guys probs think I'm bonkers for priming before doing the majority of the welding but I was fighting a loosing battle going back and fourth every night and grinding the same rust off that grew overnight lol
- Attachments
-
- IMG_20180517_165037.jpg (191.17 KiB) Viewed 5241 times
-
- MVIMG_20180517_165033.jpg (83.36 KiB) Viewed 5241 times
-
- IMG_20180517_165044.jpg (189.07 KiB) Viewed 5241 times
-
Casey
- Admin
- Posts: 1322
- Joined: Sat May 07, 2011 5:46 pm
- Location: Colchester, UK
- Has thanked: 505 times
- Been thanked: 451 times
Re: 1975 RX-4 SEDAN - BUILD THREAD - SCABSY
Nice, steady progress there 
KIMI 1 : 1st Gen, "hybrid" 1983 silver S2 running gear in a 1985 S3 shell, SORN'd, long term resto project
KIMI 2 : 1st Gen, 1983 silver S2 - now sold to Ian Mothersole on here.
KIMI 3 : 1st Gen, 1983 red S3
Plus a 2004 Full Bridgeported RX-8
KIMI 2 : 1st Gen, 1983 silver S2 - now sold to Ian Mothersole on here.
KIMI 3 : 1st Gen, 1983 red S3
Plus a 2004 Full Bridgeported RX-8
-
MelloYello
- VIP User
- Posts: 1151
- Joined: Wed Jun 01, 2011 8:42 pm
- Location: London, England.
- Has thanked: 22 times
- Been thanked: 52 times
Re: 1975 RX-4 SEDAN - BUILD THREAD - SCABSY
Cheers guys, making it second nature to try and doccument this build every night/as much as possible as I know all of you have rotor shaped brains like myself 
.
Will update the tread tonight!
. Will update the tread tonight!
-
Tepper
- Posts: 81
- Joined: Sun Jul 14, 2013 3:34 pm
- Location: Reading, UK
- Has thanked: 1 time
- Been thanked: 10 times
Re: 1975 RX-4 SEDAN - BUILD THREAD - SCABSY
Slow down, you're showing some of us up 
nice work though, will be interested to see if you find somewhere good for metric fine fastenings.
nice work though, will be interested to see if you find somewhere good for metric fine fastenings.-
codge
- RX7fb LEGEND
- Posts: 2668
- Joined: Fri Apr 01, 2011 11:41 am
- Location: South Yorks.
- Been thanked: 4 times
Re: 1975 RX-4 SEDAN - BUILD THREAD - SCABSY
Hi Scabs, I've been keeping quiet but watching with interest.
Keep up the great work.
Codge (Dave)
Keep up the great work.
Codge (Dave)
