Cibie iode

Anything related to the cars electrics... problems.... mods... fixes etc
Post Reply
User avatar
kenwhiteside
Posts: 217
Joined: Sat May 26, 2012 7:03 pm
Location: Hove
Has thanked: 2 times
Been thanked: 21 times

Cibie iode

Post by kenwhiteside »

Does anyone have detail of how these were wired up standard on the elford turbo? Just acquired a set to complete my front bumper.
User avatar
ian65
Admin
Admin
Posts: 6402
Joined: Wed Mar 30, 2011 12:11 am
Has thanked: 315 times
Been thanked: 376 times

Re: Cibie iode

Post by ian65 »

wiring instructions / diagram in here...

http://rx7fb.com/viewtopic.php?f=21&t=2649

1999 Jaguar XJR V8 Supercharged

1992 Peugeot 205 1.9 GTI
2003 Mercedes SLK 200 Kompressor
User avatar
kenwhiteside
Posts: 217
Joined: Sat May 26, 2012 7:03 pm
Location: Hove
Has thanked: 2 times
Been thanked: 21 times

Re: Cibie iode

Post by kenwhiteside »

I didn't see that however it just says to connect to main light positive? Where exactly do they take this from?

What I really want is to wire them to the old antenna switch in the centre console via a relay. Where is the best place to take a switched positive from bearing in mind there will be a 110w draw?
User avatar
DKWW2000
VIP User
VIP User
Posts: 1625
Joined: Sun Jul 06, 2014 10:16 pm
Location: English Riviera - South Devon
Has thanked: 183 times
Been thanked: 188 times

Re: Cibie iode

Post by DKWW2000 »

Ken,
The easiest way via a relay is to take the +switch feed from dip/main/side (depending on when you want them on) feed from either headlight, relay + feed from Battery & earth via your Antennae switch (there is a earth feed on a bolt directly below).
Each Spot also has to be earthed.
RX7 FB S3 - RX7 FC TII Vert
Rotaries Previously Owned:-
2 x NSU Ro 80s - 2 x S2 RX7s - Suzuki RE 5 - DKW(Hercules) W2000 - Norton (Krauser) Commander
Post Reply

Return to “Electrics”