13B EGI 6 port weber IDA manifold

gt_james · Post by **gt_james** » Thu Dec 08, 2016 12:05 am

Hey guys, I have a weber 48IDA and 12A manifold, but I've decided to buy a S4 13B EGI 6 port engine, and I'd like to use the weber on it. I know it's probably a long shot but does anyone have a manifold?
If not where would be the best place to buy a manifold? I have read that the racing beat/mazdatrix items are suited for a LHD car, and that I'm best to buy from AUS/NZ. Where in Aus/NZ would I be able to get one? I have found several places that list the manifold but not in stock, and I have seen EFI hardware list a manifold but I imagine that the manifolds are made by and available from someone else and EFI just sell them on.

richrx · Post by **richrx** » Thu Dec 08, 2016 2:43 pm

http://www.ebay.com.au/itm/172408590030

If thats not what you need then i wiuld contact the seller, surely if he cant get it no one can?

Hope that helps

Rich

Hobbawobba · Post by **Hobbawobba** » Thu Dec 08, 2016 2:52 pm

Bro let me know if you decide to order through EFI Hardware aye. You know I'm planning to order some bits from there eventually

gt_james · Post by **gt_james** » Fri Dec 09, 2016 10:43 pm

richrx wrote:http://www.ebay.com.au/itm/172408590030

If thats not what you need then i wiuld contact the seller, surely if he cant get it no one can?

Hope that helps

Rich

not quite what I need, thats for a 4 port

this is what I've found. confusingly the call it a turbo manifold

https://www.efihardware.com/products/28 ... A-Manifold

ian65 · Post by **ian65** » Sat Dec 10, 2016 12:07 am

gt_james wrote:
richrx wrote:http://www.ebay.com.au/itm/172408590030

If thats not what you need then i wiuld contact the seller, surely if he cant get it no one can?

Hope that helps

Rich
not quite what I need, thats for a 4 port

this is what I've found. confusingly the call it a turbo manifold

https://www.efihardware.com/products/28 ... A-Manifold

that's a bit pricey...have you checked out the classifieds on rx7club.com?

TOOL · Post by **TOOL** » Sat Dec 10, 2016 11:20 am

I got mine from these guys:

http://racecast.com.au/

Ask them if they have any used ones or shop soiled

gt_james · Post by **gt_james** » Sat Dec 10, 2016 7:53 pm

ian65 wrote:
gt_james wrote:
richrx wrote:http://www.ebay.com.au/itm/172408590030

If thats not what you need then i wiuld contact the seller, surely if he cant get it no one can?

Hope that helps

Rich
not quite what I need, thats for a 4 port

this is what I've found. confusingly the call it a turbo manifold

https://www.efihardware.com/products/28 ... A-Manifold
that's a bit pricey...have you checked out the classifieds on rx7club.com?

It's only $15 more than racecast, and much cheaper than racing beat. I will have a look on RX7Club, but I imagine thats mainly a us forum?

gt_james · Post by **gt_james** » Sat Dec 10, 2016 7:54 pm

TOOL wrote:I got mine from these guys:

http://racecast.com.au/

Ask them if they have any used ones or shop soiled

I looked on there first, says out of stock, and most other places that stock the same ones look out of stock

were they any good to deal with?

-ME- · Post by **-ME-** » Mon Jan 16, 2017 7:06 pm

Blink Performance Autralia make them. Peter was the founder of Simply Maz who initially made the manifolds. With the pound down they are 250 quid plus postage on EBay. If you want I can try and message the guy. I think I paid 100 quid back in the day of 2.5 au to the pound. Well worth the conversion. Wakes up a sluggish Fb and will make it feel quite brisk. Even more so with a light flywheel. (Blink make them too, need an Auto counterbalance to fit one)

www.RX7fb.com

13B EGI 6 port weber IDA manifold

13B EGI 6 port weber IDA manifold

Re: 13B EGI 6 port weber IDA manifold

Re: 13B EGI 6 port weber IDA manifold

Re: 13B EGI 6 port weber IDA manifold

Re: 13B EGI 6 port weber IDA manifold

Re: 13B EGI 6 port weber IDA manifold

Re: 13B EGI 6 port weber IDA manifold

Re: 13B EGI 6 port weber IDA manifold

Re: 13B EGI 6 port weber IDA manifold