Beehive Oil Cooler

Everthing you need to know, Oils, Air Filters, Oil Filters, Spark Plugs, Wipers, Bulbs. How to change them & When...
Post Reply
TOOL
VIP User
VIP User
Posts: 2598
Joined: Thu Sep 01, 2011 10:30 am
Location: Switzerland
Been thanked: 24 times

Re: Beehive Oil Cooler

Post by TOOL »

It should be for a set of 4. 2 under the beehive and another 2 under the pedestal.
Back in the UK for the summer, maybe longer......
Top
User avatar
MelloYello
VIP User
VIP User
Posts: 1151
Joined: Wed Jun 01, 2011 8:42 pm
Location: London, England.
Has thanked: 22 times
Been thanked: 52 times

Re: Beehive Oil Cooler

Post by MelloYello »

Ah yes. Now I understand. Read through the thread properly now.

So I can see that 4 o-rings are needed.
Top
codge
RX7fb LEGEND
RX7fb LEGEND
Posts: 2668
Joined: Fri Apr 01, 2011 11:41 am
Location: South Yorks.
Been thanked: 4 times

Re: Beehive Oil Cooler

Post by codge »

I'm good for 4 'O' rings, if that's what's needed.

Shan't hold you to it if I get 2 too many. Thanks again.
Top
RamoNZ
VIP User
VIP User
Posts: 799
Joined: Wed Jul 13, 2011 3:56 pm
Location: Auckland, New Zealand
Been thanked: 1 time

Re: Beehive Oil Cooler

Post by RamoNZ »

Mine arrived safe - Thanks James!
1980 Series 1, Minty Pea Green 13b Turbo
Top
User avatar
Hobbawobba
VIP User
VIP User
Posts: 1937
Joined: Tue Nov 01, 2011 9:44 pm
Location: Worcester - UK
Has thanked: 627 times
Been thanked: 218 times

Re: Beehive Oil Cooler

Post by Hobbawobba »

Same here. Thanks again man! 0-0
Top
codge
RX7fb LEGEND
RX7fb LEGEND
Posts: 2668
Joined: Fri Apr 01, 2011 11:41 am
Location: South Yorks.
Been thanked: 4 times

Re: Beehive Oil Cooler

Post by codge »

And mine today.....Thanks matey.

Dave
Top
User avatar
DKWW2000
VIP User
VIP User
Posts: 1625
Joined: Sun Jul 06, 2014 10:16 pm
Location: English Riviera - South Devon
Has thanked: 183 times
Been thanked: 187 times

Re: Beehive Oil Cooler -

Post by DKWW2000 »

I have both parts of the Beehive in bits at the moment to replace 'O' rings. I am thinking :idea: of smearing a very thin film of RTV between the plates as well, I can not see any problems - any thoughts :?:
RX7 FB S3 - RX7 FC TII Vert
Rotaries Previously Owned:-
2 x NSU Ro 80s - 2 x S2 RX7s - Suzuki RE 5 - DKW(Hercules) W2000 - Norton (Krauser) Commander
Top
User avatar
Hobbawobba
VIP User
VIP User
Posts: 1937
Joined: Tue Nov 01, 2011 9:44 pm
Location: Worcester - UK
Has thanked: 627 times
Been thanked: 218 times

Re: Beehive Oil Cooler

Post by Hobbawobba »

Will oil eat away at the RTV and cause a leak? Can't remember haha. I just replaced the o rings like standard when I done mine. I recently swapped over to an FC oil cooler. The o rings I replaced 3 years ago are still sweet! Had no leaks or anything. I've re-used them on my pedestal that Tool gave me. Still no leaks!

Hope that makes sense. Sending this from my phone hahaha
Top
TOOL
VIP User
VIP User
Posts: 2598
Joined: Thu Sep 01, 2011 10:30 am
Location: Switzerland
Been thanked: 24 times

Re: Beehive Oil Cooler -

Post by TOOL »

DKWW2000 wrote:I have both parts of the Beehive in bits at the moment to replace 'O' rings. I am thinking :idea: of smearing a very thin film of RTV between the plates as well, I can not see any problems - any thoughts :?:
Not necessary.
Back in the UK for the summer, maybe longer......
Top
User avatar
DKWW2000
VIP User
VIP User
Posts: 1625
Joined: Sun Jul 06, 2014 10:16 pm
Location: English Riviera - South Devon
Has thanked: 183 times
Been thanked: 187 times

Re: Beehive Oil Cooler -

Post by DKWW2000 »

TOOL wrote:
DKWW2000 wrote:I have both parts of the Beehive in bits at the moment to replace 'O' rings. I am thinking :idea: of smearing a very thin film of RTV between the plates as well, I can not see any problems - any thoughts :?:
Not necessary.
OK Thanks W(p
RX7 FB S3 - RX7 FC TII Vert
Rotaries Previously Owned:-
2 x NSU Ro 80s - 2 x S2 RX7s - Suzuki RE 5 - DKW(Hercules) W2000 - Norton (Krauser) Commander
Top
Post Reply

Return to “RX7 Maintenance & Service”