Hi guys, I'm after a set of standard springs from a series 2 rx7.
Can anybody help me out? Cheers. Luke.
WANTED: Series 2 standard springs
-
BO0557
- VIP User
- Posts: 363
- Joined: Fri Oct 07, 2011 12:08 pm
- Location: Kent UK - Sydney Aus
- Been thanked: 1 time
Re: WANTED: Series 2 standard springs
I have a set of aftermarket springs that are heavy duty and lower than standard
£80
£80
Re: WANTED: Series 2 standard springs
Ok, could you measure the length of them please?
I want them for an '82 626 and, as far as I'm aware the rx7 of the same vintage shares the majority of the chassis components but sit 1.5" lower than a 626.
Ideally I'd like the complete front strut assemblies as the struts are shorter on an rx7 so I could go lower on the 626 and still retain a decent amount of suspension travel. But as bits for these cars seem to be few and far between springs will have to do for now. Hope that makes sense. Cheers. Luke
I want them for an '82 626 and, as far as I'm aware the rx7 of the same vintage shares the majority of the chassis components but sit 1.5" lower than a 626.
Ideally I'd like the complete front strut assemblies as the struts are shorter on an rx7 so I could go lower on the 626 and still retain a decent amount of suspension travel. But as bits for these cars seem to be few and far between springs will have to do for now. Hope that makes sense. Cheers. Luke