My first gen rx7 project

Restoring or fettling your ride ? Show us your progress.
User avatar
RX7Mazdaman
Posts: 6
Joined: Mon Oct 15, 2018 7:50 pm

Re: My first gen rx7 project

Post by RX7Mazdaman » Sun Nov 11, 2018 8:44 pm

danny wrote:
Tue Nov 06, 2018 8:18 pm
Yup, great place to shop!Image
Danny - I know this is a little old - did you buy in your big haul an idler arm at all for an early RX7 - the one I ordered from Australia for my 1981 came with the wrong bolt holes, just wondering where else I can get one !

Cheers

Justin

User avatar
ian65
Posts: 5659
Joined: Wed Mar 30, 2011 12:11 am

Re: My first gen rx7 project

Post by ian65 » Sun Nov 11, 2018 9:15 pm

Rockauto automatically send parts biased towards the LHD market so be careful when buying idler arms, brake master cylinders etc that are handed.
1986 Series 3 13B Turbo II
http://rx7fb.com/viewtopic.php?f=2&t=2400
1992 Peugeot 205 1.9 GTI
1975 Honda SL125 Street Scrambler

Adrian
Posts: 30
Joined: Mon Oct 01, 2018 2:58 pm

Re: My first gen rx7 project

Post by Adrian » Tue Nov 13, 2018 1:17 am

Hello Dave car I'm.restoreing is a reg 01/10/83 the front crewmember suspension Tec is from.c reg 18/12/85 logbook states series 2 bought discs from motor Oracle in UK hopefully correct I did ring them first could not find wheelbearings from UK so orderd from rock autos so that might be incorrect parts from what u told me oh well bought stabilizing bars& trackrodends too. Have you seen the white rx7elfordturbo how tempting is that all my friend are saying just buy that. Thing is I know if I did my project car would get left so I'm going 2 keep going with that as I find it very rewarding thanks for your advice adrian

KiwiDave
Posts: 1797
Joined: Sat Nov 05, 2011 8:07 pm
Location: Feltham, Southwest London

Re: My first gen rx7 project

Post by KiwiDave » Wed Nov 14, 2018 4:54 pm

If you've ordered discs for a 1983 model from the UK, then you should get the correct parts.

If you've asked Rockauto for wheel bearings for a 1981 thru 1983 12a, then they will be fine.

S2 and S3 use the same inner bearings. S3 uses a larger outer bearing.
1985 Sunrise Red S3 TWR
2003 Mercedes E320 CDI Estate AMG

Adrian
Posts: 30
Joined: Mon Oct 01, 2018 2:58 pm

Re: My first gen rx7 project

Post by Adrian » Mon Nov 26, 2018 3:12 am

Well lads I've been really busy so watch this space beginning 2 look really good on that note I'm going 2 stay quiet in till I put my pics on

Post Reply