www.RX7fb.com

Hi guys, just seeing if anyone has a Weber setup for my engine. It's a bridgeported 13b 6 port but I can use a 12a or 4 port manifold as I can machine adapter plates. I also need an ignition setup for it too, I've got a dizzy but would rather just buy everything ready to bolt on. Any help would be great. Thanks

Hi,

Read this first, so you get the right set up: http://www.racingbeat.com/manuals/webercomponents.pdf

DB

I have a 6 port 13B with weber 48 ida. I bought the carb used, I bought a manifold from select maz in Australia, holley fuel pump and reg I got used. Try and get an Italian IDA or an empi one, the Spanish ones aren't as good. You will need to set up your carb to suit your specific engine. I have a 12A manifold I might sell.

DB RX63 wrote:Hi,

Read this first, so you get the right set up: http://www.racingbeat.com/manuals/webercomponents.pdf

DB

You'd need to set up individually to your engine, I started with racing beat settings and went from there. I need to get an O2 sensor to get it spot on.