www.RX7fb.com

Hi guys.
Just need a bit of help working out the stud pattern of my series 1-2.I have read on other sites that the measurement in our local area is 4x110 PCD , But the problem im facing is im buying wheels from USA and they measure them in a different format. Im from Australia so want to make sure im order the right stud pattern for them.
The closest I have gotten to working it out is 4 x 4.25 in. Bolt Circle, 3.5 in. As you can see, they display the stud pattern as inch not millimetres.
Any help would be much appreciated.

Jared.

http://www.convertunits.com/from/inches/to/mm
110mm is 3.937007874015748"

1 Inch = 25.4mm

110mm = 4.33 Inches.

4.25" is the same as 4x108 which is Ford and Peugeot, some SAAB.

Wheels will sortof fit - some people have tried with success, others not so lucky.

Always look for 110 - its the same as KE series Toyota do should be a few floating in US - if not, Oz is your next best place...

mpk490p wrote:http://www.convertunits.com/from/inches/to/mm
110mm is 3.937007874015748"

my bad yes 4.330708661417323

Thanks guys. That's the number I was looking for. Now I know what to look for.