I am going to state the obvious, but is the timing set up correctly?
I only mention it because I am dealing with that at the moment.
Wires' 12a Turbo
- MelloYello
- VIP User

- Posts: 1151
- Joined: Wed Jun 01, 2011 8:42 pm
- Location: London, England.
- Has thanked: 22 times
- Been thanked: 52 times
Re: Wires' 12a Turbo
So it ran for a bit, enough to fail an MOT on emissions (running seriously rich), get to a show and eat some more spark plugs along the way, but it did get there!

I was surrounded by FD's, but there wasn't any other FB's or FC's about.

A little help required for the trip home...

There were many laughs as I made brap brap noises out of the window
Now I can save some cash up and get it to a tuner to set up and then run the engine in correctly so I can sell my shares in NGK.
This RX8 drag car was immmense!


I was surrounded by FD's, but there wasn't any other FB's or FC's about.

A little help required for the trip home...

There were many laughs as I made brap brap noises out of the window
Now I can save some cash up and get it to a tuner to set up and then run the engine in correctly so I can sell my shares in NGK.
This RX8 drag car was immmense!

Re: Wires' 12a Turbo
"Petrol vehicles used before August 1975 and diesel vehicles used before August 1979 are tested by sight."
https://www.gov.uk/emissions-testing
https://www.gov.uk/emissions-testing
- Hobbawobba
- VIP User

- Posts: 1948
- Joined: Tue Nov 01, 2011 9:44 pm
- Location: Worcester - UK
- Has thanked: 629 times
- Been thanked: 222 times
Re: Wires' 12a Turbo
The show (and FB) look pretty good aye! I'll try and pop up at some point soon now I have mine on the road
Bottom right of Ians attachment
Bottom right of Ians attachment
- richrx
- VIP User

- Posts: 569
- Joined: Thu Feb 14, 2013 9:46 am
- Location: Glasgow
- Has thanked: 31 times
- Been thanked: 31 times
Re: Wires' 12a Turbo
Whats the builders thoughts on this? A mapping issue or is it the general way a new engine runs? Its a cracking looking car so hopfully its back soon
Rich
Rich
Re: Wires' 12a Turbo
the builder agreed to just do the internal rebuild and leave the rest for me to sort out myself or with a reputable tuner due to the Frankenstein nature of the build.
it has started to smooth out a lot when it was running, it really just needs setting up correctly. going to have a chat with Pip at WGT in the near future.
it has started to smooth out a lot when it was running, it really just needs setting up correctly. going to have a chat with Pip at WGT in the near future.



