Page 3 of 5
Re: Replacement Panels/ Metalwork
Posted: Wed Jun 24, 2020 8:50 am
by rotarypower
DeanRX7 wrote: ↑Mon Jun 22, 2020 3:06 pm
Guys, I have been in touch with Steve (Thanks again Ian) and he said I could put an order in for sills, depending on quantity. Price may come down if a few of us order. @Ian, should I start a new thread for orders? I will get a L&R set, maybe two sets, depending on price of course.
Reply on here or PM?
Put me down for a L & R set as well please.
I don't get much chance to check this site at the moment so I may not spot a new thread, but if you drop me a PM with the details or a link to any new thread then I'll get that.
Cheers
Rich
Re: Replacement Panels/ Metalwork
Posted: Thu Jun 25, 2020 8:55 pm
by DeanRX7
djguru wrote: ↑Tue Jun 23, 2020 11:04 pm
I never received a reply from Steve last week either via eBay or his mobile - I'm interested in sills and rear arch repair sections, so count me in if you don't mind!
Thats 3xL and 3xR so far......anyone else?
Re: Replacement Panels/ Metalwork
Posted: Fri Jun 26, 2020 10:53 am
by gt_james
I am interested in rear arch repair panels, not sure about sills, Is this for the rear section of outer sill, or the full length from the back arch to the front wing?
Re: Replacement Panels/ Metalwork
Posted: Fri Jun 26, 2020 6:59 pm
by KiwiDave
[quote=DeanRX7 post_id=46845 time=1593114933 user_id=403
Thats 3xL and 3xR so far......anyone else?
[/quote]
I'd be up for a set. The body kit probably hides many evil things. Only a couple of small bubbles on the arches but I'd rather be prepared either way.
Re: Replacement Panels/ Metalwork
Posted: Sat Jun 27, 2020 8:19 am
by biznatch
I'd be interested in a RHS rear arch Dave.
Re: Replacement Panels/ Metalwork
Posted: Mon Jun 29, 2020 8:06 pm
by DeanRX7
Looks like I will continue on this thread for the order.
So far for both left and right sills.
djguru
KiwiDave
gt_james
rotarypower
DeanRX7 (me)
I will give it a few more days then email Steve.
OK?
Re: Replacement Panels/ Metalwork
Posted: Mon Jun 29, 2020 8:08 pm
by DeanRX7
gt_james wrote: ↑Fri Jun 26, 2020 10:53 am
I am interested in rear arch repair panels, not sure about sills, Is this for the rear section of outer sill, or the full length from the back arch to the front wing?
https://www.ebay.co.uk/itm/MAZDA-RX7-FB ... SwFL9dh0s-
James, this could be for you! I have seen a few cars for scrapping on ebay which could also be an option.
Re: Replacement Panels/ Metalwork
Posted: Tue Jun 30, 2020 9:51 am
by djguru
DeanRX7 wrote: ↑Mon Jun 29, 2020 8:06 pm
Looks like I will continue on this thread for the order.
So far for both left and right sills.
djguru
KiwiDave
gt_james
rotarypower
DeanRX7 (me)
I will give it a few more days then email Steve.
OK?
Just to confirm that I'm looking for the rear arch sections as well, I'm sure these used be in 3 pieces from Steve...at this stage though it's whatever he can supply!
Dave
Re: Replacement Panels/ Metalwork
Posted: Tue Jun 30, 2020 9:15 pm
by KiwiDave
Left & Right sills
djguru
KiwiDave
gt_james
rotarypower
DeanRX7 (me)
Left & Right rear arch sections
djguru
KiwiDave
Re: Replacement Panels/ Metalwork
Posted: Wed Jul 01, 2020 9:50 am
by DeanRX7
KiwiDave wrote: ↑Tue Jun 30, 2020 9:15 pm
Left & Right sills
djguru
KiwiDave
gt_james
rotarypower
DeanRX7 (me)
Left & Right rear arch sections
djguru
KiwiDave
I have not asked Steve yet about the rear arches. Will mention it in my next msg.