Page 3 of 5
Re: Elfords big brother
Posted: Tue Nov 17, 2015 6:02 pm
by KiwiDave
[quote="Th0m4s"
Good to hear the exhaust gas temperatures are ok. I guess that means I need a better egt gauge. My VDO gauge only shows temperatures up to 900°C. I will need an old looking gauge which is able to show a bit more. If you know any good looking egt gauges please tell me...

[/quote]
This has a good temperature range and has a blank face when not in use
http://www.ebay.co.uk/itm/290943031476? ... EBIDX%3AIT
Re: Elfords big brother
Posted: Wed Nov 18, 2015 10:58 am
by Th0m4s
Smoked glass doesn't fit old cars in my opinion. I need something like the old vdo gauges.
Re: Elfords big brother
Posted: Thu Nov 19, 2015 5:16 pm
by Th0m4s
I've got a new question here!
I've allready owned a S4 Turbo II so it didn't surprise me that the water temperature gauge of my RX7 never went past the first quarter of the gauge but just to be sure I wanted to ask if anything could be wrong with the temperature. I've never seen an other S1 RX7 before with which I could compare my gauge readings. Not enough around in Germany...

Re: Elfords big brother
Posted: Thu Nov 19, 2015 6:45 pm
by KiwiDave
Check the thermostat operation first if you are getting constantly low temperature readings.
Re: Elfords big brother
Posted: Thu Nov 19, 2015 7:35 pm
by DKWW2000
Th0m4s wrote:never went past the first quarter of the gauge but just to be sure I wanted to ask if anything could be wrong with the temperature

Mine normally sits at about a quarter unless I am in Traffic & then it will go to about half way, I have a new Thermostat etc
Re: Elfords big brother
Posted: Fri Nov 20, 2015 2:27 am
by TOOL
The factory gauges are not great. Fit a decent aftermarket sender and gauge if you want to know what temps you have.
Re: Elfords big brother
Posted: Mon Nov 30, 2015 5:11 pm
by Th0m4s
Re: Elfords big brother
Posted: Mon Nov 30, 2015 7:59 pm
by apexheid
Bye.Bye Elfords.. hello TWR...
Re: Elfords big brother
Posted: Mon Nov 30, 2015 9:27 pm
by richrx
I really like the way this is going
When do you plan on sanding the paint back? Plenty of pics please
Rich
Re: Elfords big brother
Posted: Tue Dec 01, 2015 5:28 pm
by Th0m4s
Just a short update: The wheels arrived today. No scratches at all. I just need to polish.
