84GSLSE 13BREW Swap build

Restoring, modifying, fettling or just enjoying your RX7 ? Share it with us here...
Post Reply
User avatar
DWNUNDR
VIP User
VIP User
Posts: 256
Joined: Sat Jan 20, 2018 4:02 pm
Has thanked: 39 times
Been thanked: 49 times

Re: 84GSLSE 13BREW Swap build

Post by DWNUNDR »

been off work for 2.5weeks and off indefinitely... no clue on whether we get paid.. as far as we know its paid leave and found out the boss thinks it could be months till we open again...

so in the mean time Ive started redoing the door inserts a different way, as much as I liked the others I screwed one up and they get tacky in heat (which is pointless in summer haha)

also still working on stereo setup.. bit by bit... havent taken any pics of where the sub box is done yet, maybe tomorrow.. and lower door panels...

we decided to paint it all instead of vinyl covering.. so we are using light bondo layers etc to get everything smoothened out etc...

also had a few mates down last weekend to hang out, drink Coronas and tinker on the cars... installed half a set of rx8 seats in the cream car.. (made some brackets for him and another guy (his car isnt there) DreaminRotary on forums)), also the red car had a clutch swap done... we also grilled steak.. lots of it...

I knocked out a cupholder at work, but after test fitting I realized it isnt going to work as seat needs to slide forward to access rear seat and also you lose a lot of passenger area leg room... so on the shelf it goes for now.. Might try to mount it behind the armrest somehow..


90237452_10157322503212921_3978227365024104448_n.jpg
90237452_10157322503212921_3978227365024104448_n.jpg (69.71 KiB) Viewed 4841 times
90860189_10157320511012921_737482366175412224_o.jpg
90860189_10157320511012921_737482366175412224_o.jpg (121.43 KiB) Viewed 4841 times
91521086_10157360376152921_3820231671576264704_o.jpg
91521086_10157360376152921_3820231671576264704_o.jpg (99.34 KiB) Viewed 4841 times
91546081_10157360986602921_2191316099948085248_o.jpg
91546081_10157360986602921_2191316099948085248_o.jpg (104.2 KiB) Viewed 4841 times
91821054_10157360986122921_8060945881291030528_o.jpg
91821054_10157360986122921_8060945881291030528_o.jpg (103.83 KiB) Viewed 4841 times
91987402_10157360986167921_3755137151533056000_o.jpg
91987402_10157360986167921_3755137151533056000_o.jpg (107.87 KiB) Viewed 4841 times
Top
User avatar
DWNUNDR
VIP User
VIP User
Posts: 256
Joined: Sat Jan 20, 2018 4:02 pm
Has thanked: 39 times
Been thanked: 49 times

Re: 84GSLSE 13BREW Swap build

Post by DWNUNDR »

got the trims redone.. happy with how they turned out for first time doing trim work etc...

also made my bracket for the oil catch can .. will finish it off tomorrow

91570094_10157364171707921_6287856903305297920_o.jpg
91570094_10157364171707921_6287856903305297920_o.jpg (107.03 KiB) Viewed 4823 times
91785964_10157364171862921_2224720521625337856_o.jpg
91785964_10157364171862921_2224720521625337856_o.jpg (91.01 KiB) Viewed 4823 times
91591844_10157368062687921_4441422627071852544_o.jpg
91591844_10157368062687921_4441422627071852544_o.jpg (101.16 KiB) Viewed 4823 times
Top
rotarypower
Posts: 221
Joined: Thu Dec 06, 2018 7:16 pm
Has thanked: 94 times
Been thanked: 71 times

Re: 84GSLSE 13BREW Swap build

Post by rotarypower »

That's looking great!

I really can't wait to get my interior sorted, its a big part of the experience of any car.
Top
User avatar
DWNUNDR
VIP User
VIP User
Posts: 256
Joined: Sat Jan 20, 2018 4:02 pm
Has thanked: 39 times
Been thanked: 49 times

Re: 84GSLSE 13BREW Swap build

Post by DWNUNDR »

been a little quiet as I am or have been off work for the last 4.5weeks.. luckily its paid... but I have had to go in a few days here and there for special covid project builds... anyways.. waiting for some response fromt eh seller but I am pulling the trigger and ordering up some front BC Coilovers for my car... just installed some in a friends 81 Rx7 and boy was I impressed with them... such a simple install (well for me as I have a lift and welder)...
Capture.JPG
Capture.JPG (79.42 KiB) Viewed 4686 times
Top
User avatar
DWNUNDR
VIP User
VIP User
Posts: 256
Joined: Sat Jan 20, 2018 4:02 pm
Has thanked: 39 times
Been thanked: 49 times

Re: 84GSLSE 13BREW Swap build

Post by DWNUNDR »

Well I was so impressed with the bc coilover setup I helped put on my friends rx7 that I just ordered a set of fronts for my car.. 2-4week wait..

Also being 45 I have finally had enough fun with my dump pipe.. I love the snake head hanging out from under the car but tbh its obnoxiously loud.. most my kids wont ride in the car and anyone who does as soon as I start accelerating they grab their ears in prep to avoid bleeding ears..

So I made the decision and rerouted it back into the system.. havent driven it yet.. so have no comparison video as of now.. maybe tomorrow..
6194A3B8-6697-4548-AD1B-9DB85886F4C7.jpeg
6194A3B8-6697-4548-AD1B-9DB85886F4C7.jpeg (156.39 KiB) Viewed 4646 times
A11B7435-B60F-46CE-833E-188DDA3A7877.jpeg
A11B7435-B60F-46CE-833E-188DDA3A7877.jpeg (151.34 KiB) Viewed 4646 times
0C5A1207-639D-4827-B4A0-D2CD87214DDB.jpeg
0C5A1207-639D-4827-B4A0-D2CD87214DDB.jpeg (273.46 KiB) Viewed 4646 times
7C852B6D-B67C-4A79-A06F-EB91DFB5EACD.jpeg
7C852B6D-B67C-4A79-A06F-EB91DFB5EACD.jpeg (355.77 KiB) Viewed 4646 times
Top
User avatar
Hobbawobba
VIP User
VIP User
Posts: 1938
Joined: Tue Nov 01, 2011 9:44 pm
Location: Worcester - UK
Has thanked: 628 times
Been thanked: 218 times

Re: 84GSLSE 13BREW Swap build

Post by Hobbawobba »

Those coilovers do look pretty nice aye. I went with ACBRON for mine. Exhaust is looking good! It's understandable to want a more quiet car aye th:
Top
User avatar
DWNUNDR
VIP User
VIP User
Posts: 256
Joined: Sat Jan 20, 2018 4:02 pm
Has thanked: 39 times
Been thanked: 49 times

Re: 84GSLSE 13BREW Swap build

Post by DWNUNDR »

totally different vehicle.. so nice to drive now
Top
User avatar
DWNUNDR
VIP User
VIP User
Posts: 256
Joined: Sat Jan 20, 2018 4:02 pm
Has thanked: 39 times
Been thanked: 49 times

Re: 84GSLSE 13BREW Swap build

Post by DWNUNDR »

Mounted the front speaker build out and speakers last week.. nothing is hooked up yet.. slow process as my mate is back working and hasnt a lot of time available right now..

Also picked up a mercury villager fan, supposed to be like the taurus fan.. 2 speed.. freakin blew dirt about 10ft away from it when I was testing it.. it will take some tweaking to mount up
731D9D0B-6984-4DE6-AACB-1EECA8A2630A.jpeg
731D9D0B-6984-4DE6-AACB-1EECA8A2630A.jpeg (205.71 KiB) Viewed 4518 times
ECD7733D-256E-4E8B-B0A1-0EF6B825CB30.jpeg
ECD7733D-256E-4E8B-B0A1-0EF6B825CB30.jpeg (254.11 KiB) Viewed 4518 times
7FA40534-AF9F-47EF-9572-AA3603F3ADF2.jpeg
7FA40534-AF9F-47EF-9572-AA3603F3ADF2.jpeg (158.33 KiB) Viewed 4517 times
Top
User avatar
Hobbawobba
VIP User
VIP User
Posts: 1938
Joined: Tue Nov 01, 2011 9:44 pm
Location: Worcester - UK
Has thanked: 628 times
Been thanked: 218 times

Re: 84GSLSE 13BREW Swap build

Post by Hobbawobba »

That's a pretty decent sized speaker there aye! Nice work :mrgreen:
Top
User avatar
DWNUNDR
VIP User
VIP User
Posts: 256
Joined: Sat Jan 20, 2018 4:02 pm
Has thanked: 39 times
Been thanked: 49 times

Re: 84GSLSE 13BREW Swap build

Post by DWNUNDR »

throwing in a new fuel pump tomorrow night (waiting on an AN fitting) and my new front bc coilovers should be here tomorrow as well... AEM fuel pump brand new a buddy gave me for all the work Ive helped with on his car... 400Lph should be ok... losing fuel pressure at higher rpms and boost... so we will see this week
Top
Post Reply

Return to “RX7 Rides and projects”