New Member

[666widebodiedride]

Timworm at its worst

IMAG0090.jpg (131.97 KiB) Viewed 4098 times

Timworm at its worst

IMAG0090.jpg (131.97 KiB) Viewed 4098 times

[666widebodiedride]

IMAG0090.jpg

IMAG0090.jpg

[ian65]

Welcome to the forum Martin
I saw Dereks car on Facebook a few weeks ago and pointed him in the direction of this forum ..... He mentioned you and I hoped you would both find your way onto here.
Please start a build thread whenever you can.... We love a good project

[666widebodiedride]

Hi Ian will certainly do that don't know how long I am going to be trapped in this chair until the hospital say I can do anything!!
But having your hip replaced is something you carn't afford to mess up so looks like I will have to be a good boy and wait till they give me the OK
until then its square eyes on the PC LOL!!! But that doesn't stop me looking for RX bargains on ebay and the web got plenty to read on the forum
anyway by the time i have finished should know all the thread like the back of my hand.

Regards Martin.

[shaunwil]

I'm afraid I can't send pm's anymore, which is understandable not had the fb for quite some years.

Plenty of info of your question on another Mazda forum, I have the same username.

Shaun

[666widebodiedride]

Thanks for that shaun have spent most of today trawling the other sites and its given me a good idea of what I need. going with the same set up you had I think i wish I had been on the forum when you sold yours would have had it off you for sure but will have to do my own now!!
Just trying to figure out which adapter plate you had for the 12a carb to the IMPCO 300A love the idea of LPG only.

Regards Martin.

[shaunwil]

I still have the bits in the shed ! It was an adapter plate to the LIM with a chevy v8 throttle with the Carb above.

Only time it didn't work was when it was very cold !

Bought most of the stuff I needed from Tinley tech.

By far the biggest requirement is to find a helpful installer who can certify the car for insurance purposes, a lot don't offer the service if you install yourself.

Shaun

[666widebodiedride]

Hi Shaun well the obvious question is are you selling them and how much do you want for them

regards Martin.

[shaunwil]

First port of call is find a local installer to allow you to certify the install. There is no point me selling you bits you can't install legally.

Shaun

[666widebodiedride]

That's not a problem I can get my car certificated at birmingham autogas where I have been going to get my LPG for the last 7 years as I already have a calibra
4x4 16v on LPG with a blos propane carburettor system and a R33 gts with Zenit pro OBD sequencial system on it.

Regards Martin.