S1 & S2 Stud pattern

[jaredr27]

Hi guys.
Just need a bit of help working out the stud pattern of my series 1-2.I have read on other sites that the measurement in our local area is 4x110 PCD , But the problem im facing is im buying wheels from USA and they measure them in a different format. Im from Australia so want to make sure im order the right stud pattern for them.
The closest I have gotten to working it out is 4 x 4.25 in. Bolt Circle, 3.5 in. As you can see, they display the stud pattern as inch not millimetres.
Any help would be much appreciated.

Jared.

Quick tricks

Quicktricks.jpg (11.82 KiB) Viewed 2699 times

[mpk490p]

http://www.convertunits.com/from/inches/to/mm
110mm is 3.937007874015748"

[RamoNZ]

1 Inch = 25.4mm

110mm = 4.33 Inches.

4.25" is the same as 4x108 which is Ford and Peugeot, some SAAB.

Wheels will sortof fit - some people have tried with success, others not so lucky.

Always look for 110 - its the same as KE series Toyota do should be a few floating in US - if not, Oz is your next best place...

[mpk490p]

http://www.convertunits.com/from/inches/to/mm
110mm is 3.937007874015748"

my bad yes 4.330708661417323

[jaredr27]

Thanks guys. That's the number I was looking for. Now I know what to look for.