Kugelfischer

Why not come in here and introduce yourself... ( it'll then open up more forum features to you)
Post Reply
Kugelfischer
Posts: 2
Joined: Thu Mar 15, 2018 9:41 pm
Location: Norwich Norfolk UK
Contact:

Kugelfischer

Post by Kugelfischer » Sun Mar 18, 2018 1:53 pm

Hi Forum,

We run a small business overhauling and modifying mechanical injection systems, mostly race car and historic stuff....we had a customer from Australia send us his injection pump from his RX7 PP (yes, a factory fit part). Apparently Mazda worked with Kugelfischer (German company, spin off from FAG bearings) to develop an injection system for racing in Asia, Australia and maybe North America. Likely this is pretty rare, our customer advised Mazda only built 20 engines.

Would anyone on this forum know if any of these special peripheral port engines reached and raced in Europe?

Thanks
Mike

TOOL
Posts: 2513
Joined: Thu Sep 01, 2011 10:30 am
Location: Var, France (ex NZ, ex UK)

Re: Kugelfischer

Post by TOOL » Sun Mar 18, 2018 9:15 pm

Are you talking about the 13G engine?
Back in sunny France

Kugelfischer
Posts: 2
Joined: Thu Mar 15, 2018 9:41 pm
Location: Norwich Norfolk UK
Contact:

Re: Kugelfischer

Post by Kugelfischer » Mon Mar 19, 2018 3:55 pm

Not the 13G engine.

This was a four cylinder piston pump.....it took us a while to work out the rotor/induction/pumping events.......

This was likely a 13B Peripheral Port engine, the customer did share the factory original pump calibration data sheets.

http://www.rotaryeng.net/RX8-p-port.html

See the black and white image on the link above.

Mike

User avatar
myatt1972
Posts: 1442
Joined: Thu Mar 31, 2011 10:54 am
Location: Staffordshire Moorlands

Re: Kugelfischer

Post by myatt1972 » Mon Mar 19, 2018 11:23 pm

Thats very interesting, Looks just like the MFI pump on my early 911.
Keith...

Post Reply