Beehive Oil Cooler

Everthing you need to know, Oils, Air Filters, Oil Filters, Spark Plugs, Wipers, Bulbs. How to change them & When...
TOOL
Posts: 2513
Joined: Thu Sep 01, 2011 10:30 am
Location: Var, France (ex NZ, ex UK)

Re: Beehive Oil Cooler

Post by TOOL » Wed Feb 20, 2013 1:37 pm

It should be for a set of 4. 2 under the beehive and another 2 under the pedestal.
Back in sunny France

User avatar
MelloYello
Posts: 1090
Joined: Wed Jun 01, 2011 8:42 pm
Location: London, England.

Re: Beehive Oil Cooler

Post by MelloYello » Wed Feb 20, 2013 6:18 pm

Ah yes. Now I understand. Read through the thread properly now.

So I can see that 4 o-rings are needed.

codge
Posts: 2602
Joined: Fri Apr 01, 2011 11:41 am
Location: South Yorks.

Re: Beehive Oil Cooler

Post by codge » Wed Feb 20, 2013 10:50 pm

I'm good for 4 'O' rings, if that's what's needed.

Shan't hold you to it if I get 2 too many. Thanks again.

RamoNZ
Posts: 798
Joined: Wed Jul 13, 2011 3:56 pm
Location: Auckland, New Zealand

Re: Beehive Oil Cooler

Post by RamoNZ » Wed Mar 06, 2013 1:04 pm

Mine arrived safe - Thanks James!
Series 3 13b EGi 6 port, Tender Blue
Series 2 12a stock, Silver
Series 1 RX2 12a, Herschel Orange

User avatar
Hobbawobba
Posts: 1277
Joined: Tue Nov 01, 2011 9:44 pm
Location: Worcester - UK

Re: Beehive Oil Cooler

Post by Hobbawobba » Wed Mar 06, 2013 5:22 pm

Same here. Thanks again man! 0-0

codge
Posts: 2602
Joined: Fri Apr 01, 2011 11:41 am
Location: South Yorks.

Re: Beehive Oil Cooler

Post by codge » Wed Mar 06, 2013 5:30 pm

And mine today.....Thanks matey.

Dave

User avatar
DKWW2000
Posts: 1214
Joined: Sun Jul 06, 2014 10:16 pm
Location: English Riviera - South Devon

Re: Beehive Oil Cooler -

Post by DKWW2000 » Thu Nov 10, 2016 7:41 pm

I have both parts of the Beehive in bits at the moment to replace 'O' rings. I am thinking :idea: of smearing a very thin film of RTV between the plates as well, I can not see any problems - any thoughts :?:
RX7 FB S3 - RX7 FC TII Vert
Rotaries Previously Owned:-
2 x NSU Ro 80s - 2 x S2 RX7s - Suzuki RE 5 - DKW(Hercules) W2000 - Norton (Krauser) Commander

User avatar
Hobbawobba
Posts: 1277
Joined: Tue Nov 01, 2011 9:44 pm
Location: Worcester - UK

Re: Beehive Oil Cooler

Post by Hobbawobba » Fri Nov 11, 2016 12:09 am

Will oil eat away at the RTV and cause a leak? Can't remember haha. I just replaced the o rings like standard when I done mine. I recently swapped over to an FC oil cooler. The o rings I replaced 3 years ago are still sweet! Had no leaks or anything. I've re-used them on my pedestal that Tool gave me. Still no leaks!

Hope that makes sense. Sending this from my phone hahaha

TOOL
Posts: 2513
Joined: Thu Sep 01, 2011 10:30 am
Location: Var, France (ex NZ, ex UK)

Re: Beehive Oil Cooler -

Post by TOOL » Fri Nov 11, 2016 2:55 pm

DKWW2000 wrote:I have both parts of the Beehive in bits at the moment to replace 'O' rings. I am thinking :idea: of smearing a very thin film of RTV between the plates as well, I can not see any problems - any thoughts :?:
Not necessary.
Back in sunny France

User avatar
DKWW2000
Posts: 1214
Joined: Sun Jul 06, 2014 10:16 pm
Location: English Riviera - South Devon

Re: Beehive Oil Cooler -

Post by DKWW2000 » Fri Nov 11, 2016 5:35 pm

TOOL wrote:
DKWW2000 wrote:I have both parts of the Beehive in bits at the moment to replace 'O' rings. I am thinking :idea: of smearing a very thin film of RTV between the plates as well, I can not see any problems - any thoughts :?:
Not necessary.
OK Thanks W(p
RX7 FB S3 - RX7 FC TII Vert
Rotaries Previously Owned:-
2 x NSU Ro 80s - 2 x S2 RX7s - Suzuki RE 5 - DKW(Hercules) W2000 - Norton (Krauser) Commander

Post Reply